|
The Prego-T
integrates GGD-160T board with one of the communications
boards (GSM dual-band cellular phone; Spread Spectrum 915
MHz; UHF radio; Beacon and/or Omnistar receiver) and the
optional Windows CE EuroRanger controller with 1/4
VGA monochrome display and cool cathode front light. We
package them all in this compact, rugged, metal box (15.9
x 4.9 x 24.2 cm) that includes generous capacity
rechargeable Li-Ion batteries (for up to 25 hours of
continuous work), and internal charger that charges the
batteries with any input from 9 to 28 volts d.c. With
included MinPad you don't need another controller for
most basic tasks. In addition to usual serial ports, it
may have USB 1.1 or Ethernet 10BaseT ports. The
Prego-T in the KuKu mode (optional) can be programmed
to turn on periodically, establish communication,
transmit their position and then go back into sleep mode. |
 (at the receiver) |
SIGNAL NAME | NUMBER | DIR | DESCRIPTION |
|---|---|---|---|---|
| Power Output | 1 |
O | External Power Output (I<0.2A in all ports) | |
| GND | 2 |
I/O |
Signal Ground | |
| CTS | 3 |
I |
Clear to Send | |
| RTS | 4 |
O |
Request to Send | |
| RXD | 5 |
I |
Receive Data | |
| TXD | 6 |
O |
Transmit Data | |
7 |
NC |
Connector type is SEALED RECEPTACLE, 7 pin ODU G80F1C-T07QC00-0000
 (at the receiver) |
SIGNAL NAME | NUMBER | DIR | DESCRIPTION |
|---|---|---|---|---|
| Power Input | 1 |
P |
+4.5V to +14.0V to PGND | |
| Power Input | 2 |
P |
+4.5V to +14.0V to PGND | |
| Power GND | 3 |
P |
Power Ground | |
| Power GND | 4 |
P |
Power Ground | |
5 |
Connector type is SEALED RECEPTACLE, 5 pin ODU G80F1C-T05QF00-0000
| SIGNAL NAME | NUMBER | DIR | DESCRIPTION |
|---|---|---|---|
| ANT_IN | TNC |
I |
RF input from LNA, 60 mA @ 5.0 Volts |
Connector type is Applied Engineering Product (AEP) 6001-7051-003
Note: Specifications subject to change without notice