 |
The
Lexon-GGD160T is based on the GGD-160T. It has 20 channels of dual
frequency GPS and GLONASS with options such as In-Band Interference Rejection (may require export license for
outside US), Common Tracking, Advanced Multipath Mitigation, frequency and timing signals,
serial, USB and Ethernet ports, an on-board power supply
that accepts any unregulated voltage from 4.75 to 28
v.d.c. (3 Watts). The receiver comes with MinPad for easy operation without the
need for external controller. All Lexon receivers have no antenna integrated inside. They give you the flexibility to use any antenna that we offer. The cable connecting Lexon to a GPS antenna can be up to 30 meter long. For longer lengths, one line amplifier should be used for every additional 30 meter. Line amplifiers should be ordered separately. |
 (at the receiver) |
SIGNAL NAME | NUMBER | DIR | DESCRIPTION |
|---|---|---|---|---|
| Power Output | 1 |
O | External Power Output (I<0.2A in all ports) | |
| GND | 2 |
I/O |
Signal Ground | |
| CTS | 3 |
I |
Clear to Send | |
| RTS | 4 |
O |
Request to Send | |
| RXD | 5 |
I |
Receive Data | |
| TXD | 6 |
O |
Transmit Data | |
7 |
NC |
Connector type is SEALED RECEPTACLE, 7 pin ODU G80F1C-T07QC00-0000
 (at the receiver) |
SIGNAL NAME | NUMBER | DIR | DESCRIPTION |
|---|---|---|---|---|
| Power Input | 1 |
P |
+4.5V to +14.0V to PGND | |
| Power Input | 2 |
P |
+4.5V to +14.0V to PGND | |
| Power GND | 3 |
P |
Power Ground | |
| Power GND | 4 |
P |
Power Ground | |
5 |
Connector type is SEALED RECEPTACLE, 5 pin ODU G80F1C-T05QF00-0000
| SIGNAL NAME | NUMBER | DIR | DESCRIPTION |
|---|---|---|---|
| ANT_IN | TNC |
I |
RF input from LNA, 60 mA @ 5.0 Volts |
Connector type is Applied Engineering Product (AEP) 6001-7051-003
Note: Specs subject to change without notice.